Differences

This shows you the differences between two versions of the page.

--- silt_sock [2023/12/19 10:16] – [Silt Sock] josh_harder
+++ silt_sock [2024/09/16 10:21] (current) – admin
@@ Line 21: / Line 21: @@
 =====Design=====
-Silt sock diameter can vary upon the site and application of the practice, but must be at least 8 inches tall during use. They should be installed in a crescent shape, parallel to the contour of the land, with the ends placed upslope of the center to prevent water from escaping around the ends of the practice.
+Silt sock diameter can vary upon the site and application of the practice. They should be installed in a crescent shape, parallel to the contour of the land, with the ends placed up-slope of the center to prevent water from escaping around the ends of the practice.
 They are not recommended for use on slopes that exceed a 2:1 ratio, but may be used in series on flatter slopes if the spacing guidelines below are followed.
@@ Line 49: / Line 49: @@
 ==References==
   *[[https://dnr.wisconsin.gov/sites/default/files/topic/Stormwater/1056_PerimeterSedimentControl-SlopeInterruption.pdf|Wisconsin DNR Perimeter Sediment Control and Slope Interruption Technical Standard 1056]]
-  *[[https://lwrd.countyofdane.com/documents/pdfs/SiltSockUseGuidelinesRevised-07-19-2021.pdf|Green Tier Silt Sock Use Guidelines]]
+  *{{ :silt_sock_green_tier.pdf |Silt Sock Technical Guidance - Green Tier}}