Differences

This shows you the differences between two versions of the page.

--- soil_loss_and_sediment_discharge [2025/04/24 14:38] – admin
+++ soil_loss_and_sediment_discharge [2026/02/11 15:03] (current) – admin
@@ Line 21: / Line 21: @@
 ====Soil Disturbing Activities====
-  *To meet the standard, a representative “worst case” slope/slope length should be chosen.
+  *To meet the standard, a representative “worst case” slope/slope length should be chosen and it's characteristics entered as a new "Bare Ground" activity.
-  *When a slope and/or slope length is changed by grading during the bare soil period, select another bare soil row under "Activity" and enter its corresponding date. Then enter a new slope and/or slope length in the appropriate column(s). This can be used to represent topsoil stripping, followed by mass grading.
+  *When a slope and/or slope length is changed by grading during the bare soil period, enter a new bare soil activity and enter its corresponding schedule date. Then enter the new slope and/or slope length in the appropriate column(s). This can be used to represent topsoil stripping, followed by mass grading.
   *While the WDNR guidance states that the USLE spreadsheet should not be used on slopes over 20%, County submittals should include slopes up to 33%.
   *In addition to the USLE calculation, erosion control plans should include a map, clearly showing the location of the flow paths modeled in the spreadsheet(s).